STOL CH701 Fast Build Kit
The STOL CH701 Fast Build Kit is assembled from the same high quality parts as the standard kit. The only difference is the level of pre-fabrication. The STOL CH 701 is custom-prepared at Can-Zac Aviation Ltd. to provide advanced pre-assembly of the standard Zenith kit. This simplifies airframe construction and dramatically reduces assembly time for the owner/builder.
Delivery Schedule:
> Delivery of standard ZAC kit to Can-Zac Aviation Ltd. : Approximately six -
ten weeks
> Upgrade to Fast Build Kit status (for basic airframe): ten weeks
Total time before delivery (or pick-up) of Fast Build Kit: +/- four months from
order date!
All interior surfaces are primed with an epoxy primer or Zinc Chromate. All internal steel parts are painted.
The fuselage is completely assembled. The landing gear and wheels are on the fuselage. The flap control assembly and aileron bellcranks are installed. The control stick assembly is in place. You must attach and align the wing, wing struts, and horizontal stab. You need to install your doors , front windshield and top window. Rudder pedals, Control cables, fuel system and electrical are the responsibility of the owner.
The wings have been jig built. They are completely assembled with standard fuel tanks installed. The leading edge slat mounts have been fabricated, aligned, and installed on the ribs. Wire for Nav/Strobe electrical is mounted in the wing.
The fiberglass tip is left un-riveted.
The leading edge slats are jig built and finished. They are
ready to join together and mount on the wing.
The flaperons are built and must be joined and hinged..
The horizontal stabilizer and elevators are built. The electric trim option is included.
You must build your rudder from the supplied kit. (If you already have purchased and constructed your rudder, you can deduct $300 from the price of the kit.
All necessary components are included (wheels, landing gear, doors, etc) to complete the airframe in approximately 250 hours.
Note: Scheduling and price is for the basic airframe without options and/or modifications. Options and modifications will add to time and cost, sometimes
significantly. Call for details!
Also Available from Can-Zac Aviation Ltd, The STOL CH701 RTF ( Ready To Fly)
